-
End Piece Collar ( EP-1 )
$5.00Replacement End Piece Collar used with the Classic non-riveted Straps.
The photo shows the front and rear view of a single End Piece Collar.
-
Harris XL-185/200–LTE Option Full Keypad Case ( RT9104B )
$44.50
This LTE model is denoted by the ” flared “ upper rear Case. ( above the belt clip and battery )
A Removable ” Rubber Pad ” is inserted ( with velcro ) inside the lower portion of the case to stabilize the radio vertically. This pad can be removed to accommodate the ” thicker ” High Cap Battery.
-
Harris XL-185/200–LTE Option Limited Keypad Case ( RT9103B )
$44.50
This LTE model is denoted by the ” flared “ upper rear Case. ( above the belt clip and battery )
This ” Limited Keypad ” Case allows you to see the screen and access the Navigation keys.
A Removable ” Rubber Pad ” is inserted ( with velcro ) inside the lower portion of the case to stabilize the radio vertically. This pad can be removed to accommodate the ” thicker ” High Cap Battery.
-
Kenwood NX-1200/1300 Plain Case ( RT 2076B )
$44.50
The case has a removable top bungee cord for improved stability.
Improved Pebble Grain leather finish.
-
Kenwood VP-8000 Limited keypad Case ( RT 9101B )
$44.50
KENWOOD VP-8000 LIMITED KEYPAD CASE
The case includes a removable ” pillow ” to accommodate both the KNB-L2 and the KNB-L3 series batteries.
-
Motorola APX-Next Plain Case ( RT-2165B )
$44.50
Both the Standard and the ” XE ” models use the same Case !
This ia a Holster Style ” peddle grain finished ” Leather Case.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
This Case works with the NNTN-9216 and NNTN-9217 Standard Capacity Batteries ONLY.
-
Motorola APX-Next-XE Plain Case ( RT-2165B )
$44.50
Both the Standard and the ” XE ” models use the same Case !
This ia a Holster Style ” peddle grain finished ” Leather Case.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
This Case works with the NNTN-9216 and NNTN-9217 Standard Capacity Batteries ONLY.
-
Motorola Next XN Plain Case ( RT-2169B )
$44.50
Please ” click ” on the images to ENLARGE .
This is a ” Holster Style ” Leather Case.
All cases are fitted with ” D-rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” so you can wear it on a Duty Belt.
*** The PLAIN side of the radio faces outward ; while the screen side faces backwards. ***
-
Motorola R2 Flat Rate Repair
$98.00
Please note and ship to the following address, for it disappears upon checkout:
RadioTech
Attn: Jerry Silva
4968 NW Foxworth Avenue
Port St. Lucie, FL 34983
*********************************************************
There is ” NO Tax ” added to orders return shipped out of the state of Florida.
*********************************************************
-
Motorola R7 and N30 Full keypad Case ( RT 2141B )
$49.50
Because of the identical ” form factor ” of both the R7 and N30 models , this Case accommodates either.
This FULL Keypad ” peddle grain finished ” Case comes with a removable pad to use with the thicker ” High Capacity ” battery.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
-
Tait TP9600 Series Limited Keypad Case ( RT-7207B )
$44.50
The lowest line of DTMF telephone keys are covered to add stability to the case front.
Pebble grain leather finish.
-
Kenwood / EF Johnson Viking VP 400/600/900 Limited Keypad Case ( RT 9096B )
$44.50The Kenwood Viking VP400/600/900 Series Limited Keypad Radio Case is pictured.
-
**Motorola XTS 3000/5000 Limited Key Pad NextGen Reflective case–( RT 2032B-RS )
$49.00
The REFLEX stripe is glued and then sewn on below the front opening.
Improved Pebble Grain leather finish.
All RadioTech Cases are made with ” D ” rings to use with a strap.
-
**RADIOTECH COMMUNICATOR RADIO STRAP PLAIN REG. 53 ( RTCOM100)**
$33.00Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
-
**RADIOTECH COMMUNICATOR PLAIN RADIO STRAP XL 63**
$39.50
Please click on the above photo.
This is the LONG XL Strap that is 10″ longer than the Standard Strap.
Via the belt buckle, the strap adjusts from 67″ to 73″ -tip to tip .
It is NOT Returnable.
Our newest Strap design improvement incorporates high density Industrial Rivetted end Pieces.
-
**RADIOTECH COMMUNICATOR REFLECTIVE RADIO STRAP REG 53**
$38.00Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
-
**RADIOTECH COMMUNICATOR REFLECTIVE RADIO STRAP XL 63″
$43.50Please click on the above photo.
This is the LONG XL Strap that is 10″ longer than the Standard Strap.
Via the belt buckle, the strap adjusts from 67″ to 73″ -tip to tip .
It is NOT Returnable.
Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
-
*Motorola XTS 3000/5000 Limited Key Pad NextGen Case–( RT 2032B )
$44.50
We upgraded the hardware with a Black Enamel coating finish.
-
Added Accessory—Speaker/Mic Cord Keeper
$2.50The RadioTech Microphone cable keeper snaps around the Spkr/Mic cable and the Shoulder Strap. This keeps the cable from swaying . It measures at 1/2 inch wide and 4 inches long. ( same as the mounted loops )
EACH LOOP SOLD SEPARATELY.
-
Classic Motorola APX-6000XE/8000XE Plain NextGen Case–( RT 2080M4 )
$44.50
This case comes with the removable Bungee Cord option.
This case works only with the ” SHORT BATTERY “
***** This UPDATED VERSION case is compatible with the PMNN4486 and PMNN4547 model batteries. *****
Copyright © 2026 Radio Technology, Inc. All Rights Reserved.