-
End Piece Collar ( EP-1 )
$5.00Replacement End Piece Collar used with the Classic non-riveted Straps.
The photo shows the front and rear view of a single End Piece Collar.
-
Harris XL-185/200–LTE Option Full Keypad Case ( RT9104B )
$41.50
This LTE model is denoted by the ” flared “ upper rear Case. ( above the belt clip and battery )
A Removable ” Rubber Pad ” is inserted ( with velcro ) inside the lower portion of the case to stabilize the radio vertically. This pad can be removed to accommodate the ” thicker ” High Cap Battery.
-
Harris XL-185/200–LTE Option Limited Keypad Case ( RT9103B )
$41.50
This LTE model is denoted by the ” flared “ upper rear Case. ( above the belt clip and battery )
This ” Limited Keypad ” Case allows you to see the screen and access the Navigation keys.
A Removable ” Rubber Pad ” is inserted ( with velcro ) inside the lower portion of the case to stabilize the radio vertically. This pad can be removed to accommodate the ” thicker ” High Cap Battery.
-
Kenwood NX-1200/1300 Plain Case ( RT 2076B )
$41.50
The case has a removable top bungee cord for improved stability.
Improved Pebble Grain leather finish.
-
Kenwood VP-8000 Limited keypad Case ( RT 9101B )
$41.50
KENWOOD VP-8000 LIMITED KEYPAD CASE
The case includes a removable ” pillow ” to accommodate both the KNB-L2 and the KNB-L3 series batteries.
-
Motorola APX-Next Plain Case ( RT-2165B )
$41.50
Both the Standard and the ” XE ” models use the same Case !
This ia a Holster Style ” peddle grain finished ” Leather Case.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
This Case works with the NNTN-9216 and NNTN-9217 Standard Capacity Batteries ONLY.
-
Motorola APX-Next-XE Plain Case ( RT-2165B )
$41.50
Both the Standard and the ” XE ” models use the same Case !
This ia a Holster Style ” peddle grain finished ” Leather Case.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
This Case works with the NNTN-9216 and NNTN-9217 Standard Capacity Batteries ONLY.
-
Motorola R7 Full keypad Case ( RT 2141B )
$49.50
This FULL Keypad ” peddle grain finished ” Case comes with a removable pad to use with the thicker ” High Capacity ” battery.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
-
Tait TP9600 Series Limited Keypad Case ( RT-7207B )
$41.50
The lowest line of DTMF telephone keys are covered to add stability to the case front.
Pebble grain leather finish.
-
Kenwood / EF Johnson Viking VP 400/600/900 Limited Keypad Case ( RT 9096B )
$41.50The Kenwood Viking VP400/600/900 Series Limited Keypad Radio Case is very similar to the pictured Case.
-
**Motorola XTS 3000/5000 Limited Key Pad NextGen Reflective case–( RT 2032B-RS )
$46.00
The REFLEX stripe is glued and then sewn on below the front opening.
Improved Pebble Grain leather finish.
All RadioTech Cases are made with ” D ” rings to use with a strap.
-
**RADIOTECH COMMUNICATOR RADIO STRAP PLAIN REG. 53 ( RTCOM100)**
$31.00Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
-
**RADIOTECH COMMUNICATOR PLAIN RADIO STRAP XL 63**
$37.50
Please click on the above photo.
This is the LONG XL Strap that is 10″ longer than the Standard Strap.
Via the belt buckle, the strap adjusts from 67″ to 73″ -tip to tip .
It is NOT Returnable.
Our newest Strap design improvement incorporates high density Industrial Rivetted end Pieces.
-
**RADIOTECH COMMUNICATOR REFLECTIVE RADIO STRAP REG 53**
$36.00Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
-
**RADIOTECH COMMUNICATOR REFLECTIVE RADIO STRAP XL 63″
$41.50Please click on the above photo.
This is the LONG XL Strap that is 10″ longer than the Standard Strap.
Via the belt buckle, the strap adjusts from 67″ to 73″ -tip to tip .
It is NOT Returnable.
Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
-
*Motorola XTS 3000/5000 Limited Key Pad NextGen Case–( RT 2032B )
$41.50
We upgraded the hardware with a Black Enamel coating finish.
-
Added Accessory—Speaker/Mic Cord Keeper
$2.50The RadioTech Microphone cable keeper snaps around the Spkr/Mic cable and the Shoulder Strap. This keeps the cable from swaying . It measures at 1/2 inch wide and 4 inches long. ( same as the mounted loops )
EACH LOOP SOLD SEPARATELY.
-
Classic Motorola APX-6000XE/8000XE Plain NextGen Case–( RT 2080M4 )
$41.50
This case comes with the removable Bungee Cord option.
This case works only with the ” SHORT BATTERY “
***** This UPDATED VERSION case is compatible with the PMNN4486 and PMNN4547 model batteries. *****
-
Classic Motorola APX-6000XE/8000XE Plain REFLEX NextGen Case–( RT 2080M4RS )
$46.00
.
This case comes with the removable top Bungee Cord option.
The REFLEX Stripe is glued and then sewn along the bottom.
This case works only with the ” SHORT BATTERY “.
***** This UPDATED VERSION case is compatible with the PMNN4547 and PMNN4486 model batteries. ******
-
Classic Motorola APX-6000XE/8000XE Limited keypad Case– ( RT 2120M )
$41.50
We upgraded the hardware with a Black coating finish.
This Case ” DOES NOT ” have a Bungee Cord .
Copyright © 2024 Radio Technology, Inc. All Rights Reserved.