The case has a removable top bungee cord for improved stability.
Improved Pebble Grain leather finish.
KENWOOD VP-8000 LIMITED KEYPAD CASE
The case includes a removable ” pillow ” to accommodate both the KNB-L2 and the KNB-L3 series batteries.
This FULL Keypad ” peddle grain finished ” Case comes with a removable pad to use with the thicker ” High Capacity ” battery.
All Cases have ” D-Rings ” to use with your shoulder strap.
The Case has a ” rear belt flap ” to wear with a Duty Belt.
A removable ” elastic ” top bungi cord is added for additional unit stability.
The lowest line of DTMF telephone keys are covered to add stability to the case front.
Pebble grain leather finish.
The REFLEX stripe is glued and then sewn on below the front opening.
Improved Pebble Grain leather finish.
All RadioTech Cases are made with ” D ” rings to use with a strap.
Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
Please click on the above photo.
This is the LONG XL Strap that is 10″ longer than the Standard Strap.
Via the belt buckle, the strap adjusts from 67″ to 73″ -tip to tip .
It is NOT Returnable.
Our newest Strap design improvement incorporates high density Industrial Rivetted end Pieces.
Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
Please click on the above photo.
This is the LONG XL Strap that is 10″ longer than the Standard Strap.
Via the belt buckle, the strap adjusts from 67″ to 73″ -tip to tip .
It is NOT Returnable.
Our newest Strap design improvement incorporates high density , industrial Rivetted End Pieces.
The RadioTech Microphone cable keeper snaps around the Spkr/Mic cable and the Shoulder Strap. This keeps the cable from swaying . It measures at 1/2 inch wide and 4 inches long. ( same as the mounted loops )
EACH LOOP SOLD SEPARATELY.
This case comes with the removable top Bungee Cord option.
The REFLEX Stripe is glued and then sewn along the bottom.
This case works only with the ” SHORT BATTERY “.
***** This UPDATED VERSION case is compatible with the PMNN4547 and PMNN4486 model batteries. ******
We upgraded the hardware with a Black coating finish.
This Case ” DOES NOT ” have a Bungee Cord .
We upgraded the hardware with a Black coating finish.
This case works with both the standard and ” High Capacity” Short thicker battery.
This Case ” DOES NOT ” have a Bungee Cord .
The APX-1000, APX-2000 and APX-4000 radio models utilize the same case . This Case works with the R ( Ruggedized ) version radio model as well. ( pictured )
Improved Pebble Grain leather finish.
***** Please ADD in the notes what battery model is used with your radio ( ie. NNTN-8128 or PMNN-4406BR or PMNN 4448, etc. )
This Custom Case is made by riveting two separate individual cases side-by-side onto a rear leather plate. PLEASE CALL TO ORDER ! Toll Free @ 1-866-894-6115
You must specify radio model types to be mounted.
We upgraded the hardware with a Black Enamel coating finish.
The Viking VP-5000 series utilizes the same case as the NX-5000 series radios.
The EF Johnson/ Kenwood VP6000 with Limited Key Pad RadioTech Radio Case is made of the finest full grain leather available in the USA.Specially developed to repel moisture and resist scuffing, the hardy zig zag nylon stitching, rust resistant rivets and “D” rings give the case unmistakable quality. With its Heavy – Duty RadioTech construction proven for years of use, this RadioTech case is precisely hand crafted to provide the maximum protection and accessibility to the Ef Johnson/ Kenwood Viking VP6000 limited keypad radio.
Upon checkout, please ship your broken radios to our physical address:
RadioTech
Attn : Jerry Silva
4968 NW Foxworth Avenue
Port St. Lucie, FL 34983
************************************************************************
There is ” NO TAX “ added to orders return shipped out of the state of Florida.
************************************************************************
Almost 5 years to the day since we last repaired this walkie-talkie . We document every unit’s history to track and aid in possible future repairs.
*************************************************************************
Before and After photos of a Repaired CP-200D unit.
************************************************************************
Before and After photos of a cement dusted, but now repaired CP-200.
If any additional charge is required, we will contact you for approval prior to repair.
*********************************************************************************************
Upon checkout, please ship your broken radios to our physical address:
RadioTech
Attn : Jerry Silva
4968 NW Foxworth Avenue
Port St. Lucie, FL 34983
*********************************************************************************
Almost 5 years to the day since we last repaired this walkie-talkie . We document every unit’s history to track and aid in possible future repairs.